GSkill F2-6400CL4D-2GBHK ReviewResults
Package actually comes with a glow-in-dark GSkill Sticker, which one may wish to stick on the PC Case, shown above very slightly visible in the light.
Light Grey heatspreaders employed on this pair.
Let's head on to the performance tests:
| Platform Test Setup |
|
| CPU |
Intel
Core 2 Duo E6300 |
| Motherboard |
ASUS P5B Deluxe Intel P965 Chipset |
| Memory |
2 x 1GB GSkill F2-6400CL4D-2GBHK |
| Graphics Card |
XFX 7800GTX |
| Hard Disk Drive |
Seagate 80GB Barracuda SATA Hard Disk Drive |
| PSU |
OCZ 520w PowerStream |
| Operating System |
Windows XP Professional SP2 |
I started off at a low voltage point of 2.1v and with the default Latency of CL4-4-3-5 (which is considered pretty decent Timings for DDR2).
Click for Bigger Image
Click for Bigger Image
Click for Bigger Image
2.25v gives a big yield transiting from 2.15v, so you can see that the rated mark of 2.1v is close to the "high-efficiency" mark.
Click for Bigger Image
510MHz at CL4-4-3-5 with just 2.3v is very nice results for a pair that is not assigned to the "Uber-Fast & Uber-Expensive" task force. To proceed from here, I had to loosen the latency to CL5-5-5-15:
Click for Bigger Image
Immediately, she went to 551MHz stable at the same modest 2.3v!



