The board supplies 2.3v for DDR2 but some may like more than that.

You can measure the VDDR2 voltage at the mosfet leg marked above with a multimeter.
Solder a 10K ohms VR to the side of the SMD resistor shown above and ground
the other end of teh VR. Set it at a maximum of 10K ohms and tune down to increase
the memory voltage.

Thats all the mods you will need to do some extreme overclocking on this board.
Enjoy!


Discuss This Guide In Forum





Return Home





Check Hottest Deals





Check Latest Prices