This is the second part of my Chiller journey. You can catch the first part here.




This is the second part of my Chiller journey. You can catch the first part
here.

So, I wanted to go the P4 route.
First, I decided to install a small duct for the condenser so that it blows
hot air away from my motherboard. A sheet of aluminum cut to dimension works
well.

Then I decided to do up some new blocks. Here are some of the materials I bought.

The aluminum column is for a future GPU dry ice run.

Here is the drill press I bought to make the blocks.

There was nothing fanciful about my blocks, just some drilled channels.

The waterblock for the Northbridge:

The waterblock for the GPU:

 

The waterblock for the CPU:

The blocks with the covers and barbs brazed on:

 

Page 1 of 712345...Last »

 

Leave a comment