How can it be any color other than ATi’s symbolic red?


CrossFire: Multi-GPU Ready!


Here’s a look at the board with UV-reactive parts all over:

The color arrangement is very close to the DFI nF4 boards….. yellow and orange
on the DIMM slots, yellow on the socket, IDE, floppy, SATA and Expansion slots.


The DFI RDX200 CF-DR side by side with a DFI nF4 SLI-DR.

First, let’s take a look at the bundle that comes with the board:

We’ve got 2 rounded IDE cables, 1 rounded floppy cable, 2 SATA cables, 2 molex-SATA
power convertors, 1 I/O shield, the audio output expansion card, the DFI Manual,
Drivers CD and a SATA RAID Driver floppy disk.


A quick installation guide that gets you set up in half an hour’s time, with
some basic instructions on setting up CrossFire cards as well.