Foxconn N68S7AA-8EKRS2H NVIDIA 680i SLI
In just a few weeks previous, there were about 4 different models of NVIDIA 680i SLI motherboards in the market – the reference boards used by EVGA, Inno3D, Biostar, etc, the IN9 32x MAX from abit, the GA-N680SLI-DQ6 from Gigabyte, the Striker Extreme and P5N32-E from ASUS. The latest addition to this list is the Foxconn N68S7AA-8EKRS2H , based on the same chipset but differently built from the Reference boards.
The box strikes a huge resemblance to the Foxconn AM2 NF590 SLI motherboard we’ve seen a while back.
A good-looking board, black colored PCB like the Reference board and dark orange coppertone for the heatsink coolers around the motherboard.
LGA775 Intel Core 2 Extreme / Core 2 Quad / Core 2 Duo / Pentium Extreme / Pentium D / Pentium 4 / Celeron D
Designed for Intel LGA775 processors with 1333MHz FSB
Northbridge: NVIDIA C55 SPP
ATX form factor 30.5cm x 24.4cm
PCB Color: Black
100 – 650MHz
4 X 240-pin DIMM sockets support max. memory capacity 32GB
2 X PCI-Express X16 slots support NVIDIA® Scalable Link Interface(SLI)
2 x NVIDIA Gigabit LAN co-supported by Marvell 88E1116 PHY chip (Transceiver)
Intel High Definition Audio (Azalia)
Realtek ALC888 8-channel HD Audio CODEC
Optical and Coaxial S/PDIF
2 x PCI-E X16, 1 x PCI-EX16(X8 bandwidth for X4, X8 and X16 devices), 2 x PCI-EX1, 2 x PCI
1 x Floppy connector
NVIDIA nForce 680i SLI MCP
VIA VT6308P FireWire controller
2 x 1394a ports @ 400 Mbps speed
Foxconn FoxOne Technology
VCore up to 1.85V