High Power Performance Pro 750W PSU review
High Power made the Performance Pro 750W a very good looking power supply; almost. They sprayed the chassis with a nice dark grey matte paint whilst the fan’s blades are white, forming a contrasting theme, while the stickers and engravings are adding even more style. Sadly, they left all of the cables but the ATX 24-pin cable without any sleeving at all which not only will create a messy colorful sight inside a system but the cables will almost certainly become a pain to hide and/or manage.
High Power placed a decorative sticker at the right side of the unit, which will be visible if the power supply is installed upside down at the bottom of a case or if the case has a windowed right side panel.
The company logo is subtly engraved at the left side of the unit.
The sticker with the unit's electrical specifications and approvals can be found at the top side of the unit.
The rear is entirely perforated to allow for the air pushed by the cooling fan to escape towards the outside of the case. The unit uses a standard A/C power cable and there is a small rocker on/off switch right next to the AC power plug.
At the front we can see only the two fan controller cable connectors. You may use them to have the speed of up to two fans thermally controlled by the power supply itself. If the cables of the fans are too short you can use the extension cables High Power provides. This unit offers the following number of connectors:
24-pin ATX connector
1 x 8 pin EPS12V/ATX12V CPU connector
1 x 4+4 pin EPS12V/ATX12V CPU connector
4 x 6+2 pin 12V PCIe connectors
8 x SATA connectors
3 x Molex connectors
1 x Floppy connector
Note that this power supply has a very limited number of Molex connectors!