A very simple package bundled with the power unit:

Some screws, cable ties, power cable and a paper-thin manual


The Dual PCI Express power Connectors supporting SLI and Cross-Fire
configuration. And the +12v EPS power connector for boards supporting EPS.

Of course, for boards that do not support EPS, just use this
convertor to convert it to your typical 4-pin +12v line.


4 SATA power connectors onboard:


6 Molex and 2 floppy power connectors onboard:


The power LED behind the unit, right beside the switch.

When the unit is switched on but not running, the LED will glow
red. When the unit runs, it will glow yellowish green.

Page 3 of 812345...Last »


Leave a comment