DIY fan VDT2000 thumb Sparkle Calibre Fly Cooling System For DIYer

SPARKLE announced Calibre Fly Cooling System – an ultimate
graphics cards cooling solution for mainstream and high-end DIYer who seek
higher graphics performance and lower working temperatures. DIYer can buy and
install the Calibre Fly cooling system by themselves. Calibre Fly Cooling System
consists of copper or Copper-aluminum combination die-casting thermal base,
high-efficient heat pipes and dual cooling fans with 0.2 mm thin cooling fins.

DIY fan VDT2000 Sparkle Calibre Fly Cooling System For DIYer

SPARKLE Computer Co., Ltd., the professional VGA card manufacturer and
supplier, today proudly announced Calibre Fly Cooling System – an ultimate
graphics cards cooling solution for mainstream and high-end DIYer who seek
higher graphics performance and lower working temperatures. DIYer can buy and
install the Calibre Fly cooling system by themselves.

The ordinary cooling fans for graphics cards may have a daunting thermal
performance puzzle due to the insufficient wind pressure and airflow from the
reference cooling fans. Now with strong R&D teams, the Calibre Fly Cooling
System was born in the SPARKLE Engineering and Development labs. SPARKLE
continues to intelligently innovate with the introduction of the next legend
within the Calibre Fly Cooling System series: the Calibre Dual Fly Cooling
System for most mainstream and high-end graphics cards on market.

detail Sparkle Calibre Fly Cooling System For DIYer

Calibre Fly Cooling System consists of copper or Copper-aluminum combination
die-casting thermal base, high-efficient heat pipes and dual cooling fans with
0.2 mm thin cooling fins. When the GPU stars working, the copper die-casting
thermal base will quickly take the working heat from the GPU to the heat-pipe
horizontally put inside the thermal base, and the heat will be equably and
rapidly spread to the left part and right part of the copper die-casting thermal
base, at same time, the two circular heat pipes also quickly bring the heat from
GPU to the 0.2 mm thin cooling fins, now the strong wind pressure and airflow
made by two cooling fans take all the heat out of the cooling module. This
Cooling System developed by SPARKLE itself can get the most heat exchange area
in a limited space; guarantee a highly efficient cooling effect. Besides, the
cooling fans of the Calibre Fly Cooling System can be adjusted aslant, so not
only MOS circuit on the PCB can be cooled efficiently, motherboard temperature
also dropped significantly, the whole cooling efficiency can be raised too.

According to the cooling test data provided by SPARKLE, when tilting the two
cooling fans of the Calibre Dual Fly Cooling System 15 degrees, the GPU, video
memory and MOS working temperatures can be 13, 4 and 10 centigrade degrees lower
than the reference cooling fans. The chassis environmental temperature also
dropped by 5 centigrade degrees. At the same time, compared with the 34dB
working noise brought by ordinary graphics cooling fans, the Fly Cooling System
exclusively provided by SPARKLE has obvious advantage; its working noise only
reaches 30dB. (Compare with reference design GeForce 8800 GT)

Calibre Fly Cooling System Features:

· Copper-aluminum combination die-casting thermal base with incredible thermal
conduct quotiety
· SPARKLE Exclusive – flow design maximizes surface area and dramatically
reduces temps
· High-efficient heat pipes to efficiently transfer the heat
· Dual cooling fans with 0.2 mm thin cooling fins, allowing strong wind pressure
and airflow
· The cooling fans can be adjusted aslant, allowing MOS circuit to be cooled
efficiently
· Ultimate Cooling Solution for GPU, Memory and MOS areas on graphics cards
· Reduces temperatures dramatically during maximum load compared with ordinary
graphics cards cooling fans

sparkle specs Sparkle Calibre Fly Cooling System For DIYer