Thermaltake TR2 800W PSU review

The Thermaltake TR2 800W power supply is a simple looking product. Its chassis is sprayed with a matte black paint and the common fan grill is chromed. The chassis measures 15cm long, which is not longer than a typical ATX power supply.

 Thermaltake TR2 800W PSU review

At the left side of the chassis Thermaltake placed a large black sticker with the electrical specifications of the power supply.

 Thermaltake TR2 800W PSU review

Thermaltake subtly engraved their company logo at the right side of their power supply, this logo however will only be visible if the power supply is installed upside down.

 Thermaltake TR2 800W PSU review

The rear is entirely perforated to allow for the air pushed by the cooling fan to escape towards the outside of the case. Thermaltake went with the simple but proven honeycomb grill design. Only a common on/off switch and a standard 3-DIN A/C power plug can be found at the rear side of the power supply.

There is absolutely nothing of interest at the front side of this power supply, not even venting holes. All of this unit’s cables are native, hard-attached to the power supply. This unit offers the following number of connectors:

Native cables

24-pin ATX connector

1 x 4+4 pin EPS CPU connector

1 x 4 pin ATX CPU connector

2 x 6+2 pin 12V PCIe connectors

2 x 6 pin 12V PCIe connectors

2 x 6 pin 12V PCIe connectors

7 x SATA connectors

7 x Molex connectors

1 x Floppy connector