Home > Gaming > Power Supplies > Thortech Thunderbolt PLUS 800W PSU Review
Power SuppliesReviews

Thortech Thunderbolt PLUS 800W PSU Review

Thortech’s engineering have certainly spent a lot of their time trying to make this product visually attractive and with good reason. The chassis is sprayed with a slightly textured matte black paint, with the paint job being immaculate.

Stickers with the gold-ish series logo occupy the sides of the product, while the sticker with the unit’s detailed electrical specifications can be found at the top of the power supply.

The chassis is about 19cm deep which means that it exceeds the ATX specification standards, even if only slightly. If it is meant to be installed inside a small or desktop computer case with limited space for the power supply, the end user will have to make sure that this product will fit.


The rear is entirely perforated to allow for the air pushed by the cooling fan to escape towards the outside of the case. Thortech have opted for the typical honeycomb design. A simple on/off switch and a standard 3-DIN A/C power plug can be seen at the rear.


At the front we can see the numerous connectors for the modular cables. The Molex-SATA cable connectors are black while the PCIe connectors are yellow. This unit offers the following number of connectors:


Native cables



24-pin ATX connector



1 x 4+4 pin 12V CPU connector



2 x 6+2 pin 12V PCIe connectors



Modular cables



2 x 6+2 pin 12V PCIe connectors



8 x SATA connectors



6 x Molex connectors



1 x Floppy connector



Leave a Reply

Your email address will not be published.

Read previous post:
Sharkoon releases new SATA QuickPort Mini USB 3.0 and USB 2.0 docks

Sharkoon is expanding its QuickPort docking station line-up with the SATA QuickPort Mini for 2.5-inch drives. The SATA QuickPort Mini...